Removal of Heavy Metals from Aqueous Solution Using Biochar Derived from Biomass and Sewage Sludge
Applied mechanics and materials（2015）
Abstract
Biochar, a production of cotton/sludge pyrolysis, was used as an adsorbent for the removal of heavy metals from aqueous solutions. In this paper, it was assessed that the effect of biochar produced parameters including pyrolysis temperature and heating rate, adsorption time, solution pH and biochar modification on removal of Cd from aqueous solution, and the removal effect of heavy metals from mixed aqueous solution was also studied. The results showed that the optimum conditions were pyrolysis temperature of 550°C, heating rate of 5°C/min, adsorption time of 90min, biochar dosage of 10g/L and solution pH=6, respectively. And the effect was a little increased when the biochar were impregnated with chemicals. About 99% Cd, Pb and Zn were removed from aqueous solution using biochar under the optimum conditions.
MoreTranslated text
求助PDF
上传PDF
View via Publisher
AI Read Science
AI Summary
AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
Example
Background
Key content
Introduction
Methods
Results
Related work
Fund
Key content
- Pretraining has recently greatly promoted the development of natural language processing (NLP)
- We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
- We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
- The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
- Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
Upload PDF to Generate Summary
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Related Papers
2009
被引用742 | 浏览
2010
被引用487 | 浏览
2012
被引用1180 | 浏览
2011
被引用794 | 浏览
2012
被引用543 | 浏览
2013
被引用303 | 浏览
Data Disclaimer
The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
Chat Paper