Physical Clogging Characteristics and Water Quality Variations by Injecting Secondary Effluent into Porous Media: A Laboratory Column Study

Artificial recharge engineering has been widely used to solve the water resource crisis. However, there are still some safety hazards regarding reclaimed water quality. Here, chlorinated secondary effluent (SE) was injected into saturated porous media composed of high–purity quartz sands. The column experiment was conducted and modeled through a developed numerical model to predict the evolution of physical clogging. Some representative inorganic and organic indicators were measured both at different times and in different column sections. The study showed that the relative hydraulic conductivity (K/K0) decreased significantly by approximately 63.5% in 40 h. Especially for the first 3 cm of the column, the clogging was the most serious, with a decrease of approximately 85.8%. The porous media has a certain degree of filtration effect on turbidity, TOC, protein (Pr) and polysaccharide (PS) but has slight removal for other water quality indicators. Pr is the main component of the intercepted TOC, and its content is higher than that of Ps. Moreover, the inorganic and organic parameter variations along the column further verified that the organic floc particles were mainly retained in the first 3 cm. The 3D excitation/emission matrix (3DEEM) fluorescence spectra illustrated that the humic acids and fulvic acids were easy to release and that their injection may be harmful to groundwater quality. The study will lay a theoretical foundation and provide a guiding scheme for optimizing China’s reclaimed water reuse technology, ensuring the safety of reclaimed water quality.