Channel Network Modeling of Flow and Transport in Fractured Rock at the Äspö HRL: Data‐Worth Analysis for Model Development, Calibration and Prediction
WATER RESOURCES RESEARCH（2023）
Stockholm Univ
Abstract
Performance assessment of nuclear waste disposal in deep crystalline bedrock demands a thorough understanding of the related flow and transport processes. Uncertainties may arise both from the selection of the conceptual model as well as the estimation of the related model parameters. Discrete fracture network (DFN) models are widely used for such modeling while channel network models (CNM) provide an alternative representation, the latter focusing on the fact that flow and transport in deep fractured media often are dominated by a small number of long preferential flow paths. This study applies the principle of channel networks, implemented in the Pychan3d simulator, to analyze the hydraulic and tracer transport behavior in a 450-m-deep fractured granite system at the aspo Hard Rock Laboratory in Sweden, where extensive site characterization data, including hydraulic and tracer test data are available. Semi-automated calibration of channel conductances to field characterization data (flow rates, drawdowns, and tracer recoveries) is performed using PEST algorithm. It was observed that an optimal CNM connectivity map for channel conductance calibration can only be developed by jointly fitting flow rates, drawdowns and tracer mass recovery values. Results from data-calibrated CNM when compared to a corresponding calibrated DFN model shows that the CNM calibrates and adapts better than a DFN model with uniform fracture surfaces. This comparative study shows the differences and uncertainties between two models as well as examines the implications of using them for long term model predictions.
MoreTranslated text
Key words
channel network model,model calibration,data-worth analysis
求助PDF
上传PDF
View via Publisher
AI Read Science
AI Summary
AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
Example
Background
Key content
Introduction
Methods
Results
Related work
Fund
Key content
- Pretraining has recently greatly promoted the development of natural language processing (NLP)
- We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
- We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
- The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
- Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
Upload PDF to Generate Summary
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Data Disclaimer
The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
Chat Paper
Summary is being generated by the instructions you defined