Effect of the Second Curing Cycle on Performance of Superconducting Magnet Insulating System
Cryogenics（2024）
Chinese Acad Sci
Abstract
In large-scale, high-field superconducting magnets used for magnetic confinement fusion, high energy accelerators, and magnetic resonance imaging, the insulating system made from glass fiber reinforced resin-based composites is the key component, which mainly plays the role of mechanical support, fixing and protecting superconducting conductors, as well as electrical insulation. Vacuum Pressure Impregnation (VPI) approach is widely used in the manufacturing of the insulation system. The second curing cycle is generally required after the first VPI and curing process. For example, after the superconducting coil is cured in the mold, the de-molding process requires the superconducting coil to be reheated according the curing temperature. Moreover, for large-scale superconducting magnets, the superconducting coil needs to undergo a second VPI process after the first VPI process to fix the coil in the coil case. In this work, the tensile and shear properties of pure epoxy resin and the glass fiber reinforced resin-based composite, were investigated at both room and cryogenic temperatures and the effect of the second curing cycle on the mechanical properties was analyzed. Additionally, the strain evolution of the Nb-Ti superconducting coil during the second curing cycle was measured using the Fiber Bragg Grating (FBG) sensors embedded in the composite. The results indicate that the second curing cycle will not introduce additional strain to the previously cured resin matrix, but the defective or weak parts of the resin matrix may be affected by the new added epoxy resin and a little extra strain has been observed.
MoreTranslated text
Key words
Epoxy Resin,Curing Cycle,Strain Response,Insulating Materials,Cryogenic Temperature,Fiber Bragg Grating Sensor
求助PDF
上传PDF
View via Publisher
AI Read Science
AI Summary
AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
Example
Background
Key content
Introduction
Methods
Results
Related work
Fund
Key content
- Pretraining has recently greatly promoted the development of natural language processing (NLP)
- We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
- We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
- The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
- Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
Upload PDF to Generate Summary
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Data Disclaimer
The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
Chat Paper
Summary is being generated by the instructions you defined