Optimization of Stiffness Performance of Six-Axis Industrial Robots Based on Posture Stiffness Evaluation Index
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE（2024）
Kunming Univ Sci & Technol
Abstract
Aiming at the problem that the stiffness performance of industrial robots depends on the posture, a method to improve the stiffness performance by optimizing the robot posture is proposed based on the robot posture stiffness evaluation index. The robot joint stiffness identification model is established by using the principle of virtual work and Jacobi matrix, and the stiffness values of six joints are obtained by least-squares. On the basis of revealing the mapping relationship between robot joints and end, the robot end flexibility ellipsoid is obtained, and the volume of the end flexibility ellipsoid is utilized as the global stiffness coefficient of the robot, so as to obtain the robot posture stiffness evaluation index. According to the posture stiffness evaluation index, the robot posture optimization model is established, and the optimized posture is obtained by using genetic algorithm. Taking the QJR6-1 robot as the experimental object, under the maximum load, the deformation of the robot end center is reduced from 0.6238 to 0.3984 mm, which is 36.13%, and the deformation of the end is greatly reduced compared with that before the optimization, which indicates that the robot’s stiffness is improved after the posture optimization, and it verifies the feasibility of the optimization model, and provides a reference to improve the stiffness performance of industrial robots further.
MoreTranslated text
Key words
Industrial robot,posture stiffness evaluation index,global stiffness coefficient,genetic algorithm,posture optimization
求助PDF
上传PDF
View via Publisher
AI Read Science
AI Summary
AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
Example
Background
Key content
Introduction
Methods
Results
Related work
Fund
Key content
- Pretraining has recently greatly promoted the development of natural language processing (NLP)
- We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
- We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
- The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
- Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
Upload PDF to Generate Summary
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Data Disclaimer
The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
Chat Paper
Summary is being generated by the instructions you defined