Response Surface Optimization Design of Coal-Derived Activated Carbon with High Capacitance Performance Using Decreased Amount of KOH Activated Agent
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS（2024）
Xian Univ Sci & Technol
Abstract
Coal-derived activated carbon (CAC) is considered as an important direction for high-economic utilization and sustainable development of coal resources. However, this process is limited due to the overall promotion of environmental protection. In this paper, CAC was prepared by H2O activation combined with KOH solution impregnation re-activation of Taixi anthracite. The addition of a small amount of KOH (less than 60 wt% of CAC(I)) significantly promoted the pore formation of CAC, and in addition, a high CAC yield (about 56%) was also obtained. The effects of impregnation conditions of KOH on the specific capacitance of CAC(II) were analyzed by response surface optimization, and the optimal preparation parameters (12.5 mol/L, 82 degrees C and 8.3 h) were obtained. The specific capacitance of CAC(II) prepared under this optimal condition is 334.2 F/g because it has a large specific surface area of 1909.92 m(2)/g and a defect degree greater than 1. KOH activation improves the wettability of CAC(II) by introducing hydroxy groups. The assembled CAC(II)//CAC(II) symmetrical device also has a higher specific capacitance (224.3 F/g at 0.5 A/g) than the commercial YP-50F. At the same time, it also has a high energy density of 31.15 Wh/kg at 500 W/kg. The physical-chemical multi-stage activation method can significantly reduce the consumption of corrosive chemical reagents in the preparation of CAC, which greatly relieves the pressure of equipment and environment, and lays the foundation for the industrial production of CAC.
MoreTranslated text
Key words
Supercapacitor,coal-derived activated carbon,response surface optimization,KOH impregnation,two-step activation
求助PDF
上传PDF
View via Publisher
AI Read Science
AI Summary
AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
Example
Background
Key content
Introduction
Methods
Results
Related work
Fund
Key content
- Pretraining has recently greatly promoted the development of natural language processing (NLP)
- We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
- We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
- The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
- Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
Upload PDF to Generate Summary
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Data Disclaimer
The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
Chat Paper
Summary is being generated by the instructions you defined