Mechanical Properties and Microstructure of Hemp Hurd Reinforced Polylactide Biocomposites for 3D Printing
Polymer Composites（2024）
Hunan Inst Technol
Abstract
Polylactide (PLA) biocomposite filaments containing hemp hurd (HH) of variable particle size were evaluated in comparison with injection-molded counterparts using single/twin screw extrusion in this study. HH particle size (35, 50, and 160 mu m) was parametrically investigated for its efficacy within PLA/HH biocomposites and fused filament fabrication (FFF)-printed parts by assessing its effect on performance through rheological, microstructural, mechanical, and surface finish analyses. In addition, melt flow indexing, rheometry, scanning electron microscopy, mechanical testing, and x-ray computed tomography were utilized to analyze microstructure, mechanical performance, and surface roughness. With an increase in particle size of the HH, the corresponding biocomposites showed increased flowability, and the injection-molded specimens showed increased impact strength. The FFF printing of the biocomposite filament presented no challenges, and the mechanical properties of FFF parts enhanced with a particle size smaller than the printed layer thickness. Compared with injection-molded parts, FFF-printed samples showed higher impact strength. The FFF-printed PLA/HH biocomposite samples showed considerable potential over their injection molded alternatives for low-volume specialized applications. Highlights Polylactide (PLA)/hemp hurd (HH) biocomposite filaments with different particle sizes of HH were developed. Melt flow and impact strength increased when HH particle size increased. 3D-printed part porosity and roughness increased when HH particle size increased. Higher HH particle size enhanced the mechanical performance of 3D-printed parts. 3D-printed parts exhibited higher impact strength than injection molded parts
MoreTranslated text
Key words
3D printing,hemp hurd,mechanical properties,particle size,polylactic acid,porosity,surface roughness
上传PDF
View via Publisher
AI Read Science
AI Summary
AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
Example
Background
Key content
Introduction
Methods
Results
Related work
Fund
Key content
- Pretraining has recently greatly promoted the development of natural language processing (NLP)
- We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
- We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
- The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
- Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
Upload PDF to Generate Summary
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Data Disclaimer
The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
Chat Paper
Summary is being generated by the instructions you defined