Evaluation of the Effectiveness of Monitoring the Axial Force of Anchors Based on Sensor-Enabled Piezoelectric Geocable (SPGC)
Acta Geotechnica（2025）
Wenzhou University
Abstract
Anchor rods are typically used for support. The axial force of anchor rods changes owing to the stress change of the rock and soil body on the slope; therefore, monitoring the axial force enables the early detection of landslides. However, the accurate monitoring of the axial force change of bolt faces many challenges, such as high monitoring cost and limited monitoring range. Therefore, a new, efficient, and cost-effective monitoring technology needs to be developed to address these challenges. In this study, a sensor-enabled piezoelectric geocable (SPGC) with an impedance–strain effect was used, which has the advantages of low cost, distribution, and quantization. The SPGC was attached to a bolt to form a sensor-enabled piezoelectric anchor rod (SPAR). SPAR tensile tests with different groove sizes, loading rates, and SPGC lengths were performed using the displacement loading method. The test results show that the normalized impedance curve of the SPAR has a good correspondence with the stress–strain curve and decreases with an increase in the tensile stress of the SPAR. The dimensions of the notch of the SPAR affect the failure speed of the SPGC in tension, and the optimal size of the notch of the SPAR is a semicircle with a diameter of 3 mm. An increase in tensile rate accelerates the monitoring failure of the SPAR, whereas an increase in SPGC length accelerates the decline rate of the normalized impedance curve and the monitoring failure of the SPAR. The SPAR can accurately monitor the axial stress change and failure process of the bolt, which can provide technical support for the distributed deformation monitoring of the slope, and is expected to provide a new solution for the monitoring and early warning of slope engineering.
MoreTranslated text
Key words
Impedance strain effect,Sensor-enabled piezoelectric geocable (SPGC),Sensor-enabled piezoelectric anchor rod (SPAR),Slope monitoring,Tensile test
求助PDF
上传PDF
View via Publisher
AI Read Science
AI Summary
AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
Example
Background
Key content
Introduction
Methods
Results
Related work
Fund
Key content
- Pretraining has recently greatly promoted the development of natural language processing (NLP)
- We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
- We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
- The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
- Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
Upload PDF to Generate Summary
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Data Disclaimer
The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
Chat Paper
Summary is being generated by the instructions you defined