Chrome Extension
WeChat Mini Program
Use on ChatGLM

Effect of Deposition Temperature on the Phase Transition of Ti, Al, C and Related Properties of the Graphite-Like Carbon Film

Ke Li,Yanxia Wu, Yanjie Xu, Shengwang Yu,Jie Gao,Ying Liu

WEAR(2025)

Taiyuan Univ Technol

Cited 0|Views1
Abstract
The graphite-like carbon films contained Ti and Al elements were prepared by magnetron sputtering at different deposition temperatures and the structure, corrosive as well as tribological properties in different environments with ZrO2 as counterpart balls were investigated. The results revealed that the sp3C content in the film first increased and then decreased, the Ti, Al elements in the films changed from TiC nanocrystals to Ti3AlC with increasing temperature. Specially, there were totally Ti3AlC with an ant-perovskite phase at 350 degrees C. Consequently, the film contained Ti3AlC phase showed better corrosive resistance compared to that contained TiC phase, due to the TiC nanocrystal reduced the migration barrier and penetration energy of Cl ions in the corrosion medium, which accelerated the process of corrosion failure. It was noteworthy that the film prepared at 350 degrees C showed better corrosion resistance due to its higher sp3C content, higher hydrophobicity, higher adhesion strength, lower residual internal stresses, and lower film porosity. All the film exhibited better tribological properties in 3.5 wt% NaCl solution than in air related to the water lubrication. Especially, owing to the synthesis effect of TiC and Ti3AlC phase, the film prepared at 300 degrees C showed better tribological properties.
More
Translated text
Key words
Magnetron sputtering,Graphite-like carbon films,Ti and Al elements,Corrosion,Tribological properties
求助PDF
上传PDF
Bibtex
AI Read Science
AI Summary
AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
Example
Background
Key content
Introduction
Methods
Results
Related work
Fund
Key content
  • Pretraining has recently greatly promoted the development of natural language processing (NLP)
  • We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
  • We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
  • The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
  • Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
Upload PDF to Generate Summary
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Related Papers
Data Disclaimer
The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
Chat Paper

要点】:研究了沉积温度对含Ti、Al元素的石墨状碳膜相变及其在不同环境下的腐蚀和摩擦学性能的影响,发现350°C下制备的碳膜具有最佳耐腐蚀性和摩擦学性能。

方法】:采用磁控溅射在不同沉积温度下制备含Ti、Al元素的石墨状碳膜,并通过结构分析和性能测试探究其腐蚀和摩擦学特性。

实验】:在350°C下制备的碳膜中存在抗钙钛矿相的Ti3AlC,该碳膜具有更高的sp3C含量、更高的疏水性、更高的粘附强度、更低的内应力和更低的膜孔隙率,使用的数据集为ZrO2作为对比球的腐蚀和摩擦学测试,结果显示在3.5 wt% NaCl溶液中所有薄膜的摩擦学性能优于空气中,300°C下制备的薄膜因TiC和Ti3AlC相的合成效应表现出更好的摩擦学性能。