A Protection System for the JET ITER-like Wall Based on Imaging Diagnostics

G. Arnoux,S. Devaux，J. Wilson,K. -D. Zastrow

Review of Scientific Instruments（2018）SCI 4区

Euratom CCFE Fus Assoc | EURATOM Assoziat | CEA DSM IRFM | Asociac EURATOM CIEMAT | Assoc EURATOM MEdC

Cited 51|Views38

Abstract

The new JET ITER-like wall (made of beryllium and tungsten) is more fragile than the former carbon fiber composite wall and requires active protection to prevent excessive heat loads on the plasma facing components (PFC). Analog CCD cameras operating in the near infrared wavelength are used to measure surface temperature of the PFCs. Region of interest (ROI) analysis is performed in real time and the maximum temperature measured in each ROI is sent to the vessel thermal map. The protection of the ITER-like wall system started in October 2011 and has already successfully led to a safe landing of the plasma when hot spots were observed on the Be main chamber PFCs. Divertor protection is more of a challenge due to dust deposits that often generate false hot spots. In this contribution we describe the camera, data capture and real time processing systems. We discuss the calibration strategy for the temperature measurements with cross validation with thermal IR cameras and bi-color pyrometers. Most importantly, we demonstrate that a protection system based on CCD cameras can work and show examples of hot spot detections that stop the plasma pulse. The limits of such a design and the associated constraints on the operations are also presented.

Translated text

Key words

imaging diagnostics,real-time protection system,hot spots,JUVIL software,image processing

Bibtex

AI Read Science

AI Summary

AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.

Example

Background

Key content

Introduction

Methods

Results

Related work

Fund

Key content

Pretraining has recently greatly promoted the development of natural language processing (NLP)
We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance

Try using models to generate summary,it takes about 60s

Must-Reading Tree

Example

Generate MRT to find the research sequence of this paper